FP1-30

• 1” ASA 150# raised face flange with full flow 1” waterway
• Built with standard long radius weld fittings with 1” NH stainless steel discharge thread and red epoxy finish inside and out
• Capable of flows up to 30 GPM
• Available with optional 1” N.P.T. female or male base

Datasheet

FP1-125

• 1-1/2” ASA 150# raised face flange with full flow 1-1/2” waterway
• Built with standard long radius weld fittings with 1-1/2” NH stainless steel discharge thread and red epoxy finish inside and out
• Capable of flows up to 350 GPM
• Available with optional 1-1/2” N.P.T. female or male base
• Height 18”, width 11”, weight 20 lbs.

Datasheet

FP2-750

• 2½” ASA 150 # raised face flange base with full seamless 2½” waterway and 2½” NH male stainless steel discharge thread
• Rated at 750 GPM at 100 PSI with standard red epoxy finish inside and out
• Height 22”, (plus 14” tiller base handle) width 13”, weight 45 lbs.

Datasheet

FP3-750-HW

• 2.5” Low Pro station monitor with handwheel operation
  
• 750 GPM @ 100 PSI rated
  
• 3” Flange inlet
  
• Stainless steel swivel construction
  
• Aluminum Bronze worm gear
  
• Red epoxy finish inside and out

Datasheet

FP4-750

• 4” ASA 150# raised face flange with full flow 2-1/2” waterway
• Built with standard long radius weld fittings with 2-1/2” NH stainless steel discharge thread and red epoxy finish inside and out
• Capable of flows up to 750 GPM
• Available with optional 2-1/2, 3 ,4 ” N.P.T. female or male base
• Height 22", (plus 14” tiller bas handle) width 13”, weight 45 lbs.
  

Datasheet

FP-3SN-750

• 3" steel waterway "snorkel style"

• Capable to flow at 750 GPM

• Steel or 303 S.S. swivels

• 360° continuous horizontal travel

• 180° vertical travel

• Suitable for harsh environments

• Stainless steel water way option

• Other colors available

• Nozzles sold separately
  

Datasheet

FP3SR-1200

• Monitor, short radius design where space is minimal
• 3” ASA 150# raised face flange base with full seamless 2½” waterway and 2½” NH male stainless steel discharge thread
• Rated at 1200 GPM
• Height 22”, width 13”, weight 45 lbs.

Datasheet

FP3F-1200

• 3” female base with full seamless 3” waterway and 2½” NH male stainless steel discharge thread
• Rated at 1200 GPM at 100 PSI with standard red epoxy finish inside and out
• Height 28”, (plus 14” tiller bas handle) width 16”, weight 52 lbs.

Datasheet

FP3-611

• Corrosion Resistant Brass Construction
• Flows 1250 GPM
• Single Waterway Low Friction Loss
• Vertical Movement Operated by Worm Gear
• 360° Horizontal and 130° Vertical Travel –70° Above to 60° below Horizontal
• Low Profile
• Coated Red
• Weight 50 pounds
  

Datasheet

FP3-636

• Rugged, Corrosion-Resistant Cast Brass Construction

• Full 360° Horizontal and 130° Vertical Travel

• 70° above to 60° below horizontal

• Brass twist locking mechanism for vertical and horizontal movement

• Vertical movement controlled by stainless steel handle rod

• Inlet available with 3" or 4" 150# ANSI flange

• 2.5 or 3" NPT thread inlet
  

Datasheet

FP3SD-1200

• 3" Monitor, 3” ASA 150# raised face flange base with full seamless 2½” waterway and 2½” NH male stainless steel discharge thread
• Rated at 1200 GPM with steering wheel handle option
• Height 28” plus 14” for tiller bar, width 16”, weight 52 lbs.

Datasheet

FP3-1250B

• Rugged, Corrosion-Resistant Brass Construction
• Full 360° Horizontal travel with friction locking mechanism
• 150° Vertical Travel—90° above to 60° below horizontal
• 3” single waterway with turning vanes at each elbow provides flow efficiency
• Low friction loss: 10 PSI at 800 GPM
• Double row of ball bearings in the swivel for smooth operation

Datasheet

FP4-2000-HW

• 4” Low Pro station monitor with handwheel operation
• 2000 GPM @ 100 PSI rated
• 4” or 6” flanged inlet
• Stainless steel swivel construction
• Aluminum Bronze worm gear
• Red epoxy finish inside and out

Datasheet

FP6-4000

• 6" ASA 150# raised face flange with a 6" full flow waterway
• Bladelock assisted locking device
• Capable of flow to 4000 GPM
• Red polyester powdercoat finish
• 6" N.H. threaded outlet

Datasheet

FP4-2000

• 4" ASA 150# raised face flange with full flow 4" waterway design
• Bladelock assisted design
• 2000 GPM capability
• 4" N.H. stainless steel discharge thread
• Red polyester powdercoat finish

Datasheet